Who are the leading epoxy suppliers and manufacturers in Australia?

Rhino Linings Australasia are leading epoxy suppliers and manufacturers, delivering high-performance industrial coatings and flooring solutions throughout Australia.

What are Rhino Linings epoxy coatings used for?

Rhino Linings epoxy coatings are used for flooring, waterproofing, primary and secondary containment, mining, defence, vehicle protection, and industrial asset preservation.

Rhino ArmaFloor WB Urethane Solutions by Rhino Linings

Rhino ArmaFloor WB Urethane

Rhino ArmaFloor WB Urethane 4:1 is a 2-component waterborne polyurethane solution that produces a highly durable and clear finish (in both Matt and Gloss) for both indoor and outdoor applications.

Rhino ArmaFloor WB Urethane 4:1 has excellent resistance to chemicals and stains, and contains a UV stabiliser to improve protection against UV light.

It can be used indoors and outdoors for the protection of concrete and interior floors where a tough, stain resistant coating is desired. It can also be used to seal exposed aggregate surfaces to provide a wet look surface in both Gloss and Matt finishes.

Rhino ArmaFloor WB Urethane Properties

Simple 2-pack mixing system at 4:1 ratio
Ideally suited for protection of concrete and masonry, slate sealing and coatings for pavers
Excellent chemical and stain resistance
Excellent wear resistance

Excellent scratch resistance
Easy application
Easy clean surface
Produces a hard, yet clear film in both Gloss and Matt

Added UV absorber improved protection against UV light (non yellowing)
Excellent resistance to weathering
Has a low odour and wash up in water immediately after use

Rhino ArmaFloor WB Urethane Applications

Driveways
Patios

Masonry
Sealing exposed aggregate, slate products and pavers

Downloads

Technical Data Sheet: Rhino ArmaFloor WB Urethane

Find Out More About Rhino’s Floor Coating Products & Capabilities

RhinoCoat CC: RhinoCoat™ CC (Crystal Clear) is a two-component, high solids, low VOC, low odour, water clear, high gloss epoxy.

RhinoCoat EP: a bisphenol-A resin reacted with a unique modified multiple ring cycloaliphatic amine adduct activator.

RhinoCoat GP: RhinoCoat™ GP (General Purpose) is an extremely tough workhorse epoxy with excellent chemical resistance. A two component, solid colour, high solids, silicone free, low viscosity, self-priming, glossy epoxy resin available in wide colour range.

RhinoCoat MB: An epoxy-based moisture barrier. It is a fast setting, clear, two component, 100% solids hybrid epoxy for on or below grade concrete slabs.

Rhino ArmaFloor 500AU: A decorative, yet highly durable polyaspartic floor coating.

Rhino TUFF STUFF: A two component, 100% solids, 0 VOC’s, exothemic, rapid curing, elastomeric, polyurethane, class 3 waterproof membrane lining system.

Rhino Hybrid HP1150: A two component, 100% solids, 0 VOC’s, exothermic, rapid curing, elastomeric, hybrid polyurea lining system.

RhinoGuard 2195: A two component, 100% solids, 0 VOC’s, exothemic, rapid curing, elastomeric, polyurethane lining system.