Rhino HiChem 1170 Industrial Protective Coatings

Rhino HiChem 1170 Protective Coatings

Rhino HiChem™ 1170 is a two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric polyurea-based lining system specifically designed for excellent chemical resistance. Rhino HiChem 1170 has passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 (2012) potable water standard and is Truesdail Laboratories listed.

Features & Benefits of Rhino HiChem 1170

• Excellent corrosion resistance
• Excellent chemical resistance
• Complies with NSF/ANSI 61 Sections 5 (2012) potable water standard
• Dense chemical structure imparts high impermeability
• Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fibreglass
• Stable from -6.7°C to 76.7˚C

Typical Uses of Rhino HiChem 1170

Durable protective lining with excellent chemical resistance for applications such as:

• Primary containment
• Chemical processing equipment, tank linings, pipe linings and wet wells
• Water and wastewater treatment facilities
• Immersion service

Rhino HiChem 1170 is Not Recommended For

• Sustained temperatures below -6-7°C or above 76.7°C
• Concrete substrates subject to high impact
• Application to high density polyethylene or thermoplastics
• Do not apply to concrete with curing or sealing membranes
• Do not apply to substrates affected by moisture content in excess of 5%
• Do not apply to concrete less than 28 days old
• Avoid applying in conditions with high humidity

NOTE – Substrate temperature must be 3°C above the dew point prior to application

Common Substrates

Concrete, fiberglass, metals and wood

Downloads

Technical Data Sheet Rhino HiChem 1170

Find out more! Call us NOW on +61 7 5585 7000 or contact Rhino Linings here