Rhino ArmaFloor 400 UHS – Heavy Duty Epoxy Flooring

Rhino ArmaFloor® 400 UHS is a two part (3:1 mixing ratio by volume), high solids, heavy duty, high build epoxy flooring system, Available in standard Neutral and Light Grey. Tinting packs are Basalt, Beige, Emerald Green, Harbour Blue, Signal Red, Golden Yellow, Koala Grey, Light Grey, Mid Grey, Bridge Grey, Lightbox Grey, Black and White.

Rhino ArmaFloor 400 UHS is a heavy duty coating offering excellent abrasion and chemical resistance. It is recommended for use in a number of industries including food and beverage, warehousing facilities, automotive and manufacturing.

With high chemical resistant properties,this heavy duty floor coating provides protection against a range of diluted acids, solvents and alkali spills and mechanical abrasion from forklifts, trucks and trailers.

Rhino ArmaFloor 400 UHS seamless coverage does not support bacterial growth, which results in a durable, hygienic and easy to clean surface. For high traffic or wet areas add Silica Sand at #30- #60 or #60 – #100 mesh for a slip resistant finish.

There is a Standard version (16hr cure at 25⁰C/50% RH) and a Rapid version (6-8hrs cure at 25⁰C/50% RH) available in this range.

Rhino ArmaFloor 400 UHS Properties

Rhino ArmaFloor 400 UHS Applications

Downloads

Technical Data Sheet: Rhino ArmaFloor 400 UHS

Colour Chart: Rhino ArmaFloor Pigments

Find Out More About Rhino’s Floor Coating Products & Capabilities

RhinoCoat CC: RhinoCoat™ CC (Crystal Clear) is two-component, high solids, low VOC, low odour, water clear, high gloss epoxy.

RhinoCoat GP: A two component, solid colour, high solids, silicone free, low viscosity, self-priming, glossy epoxy resin available in wide colour range.

Rhino ArmaFloor 200SC: A 100% solids epoxy primer, skim coat, high build, concrete repair and coving system.

Rhino ArmaFloor 500AU: A decorative, yet highly durable polyaspartic floor coating.

WB Urethane: A water based, highly durable and clear coating (in both Matt and Gloss) for both indoor and outdoor applications.

Rhino TUFF STUFF: A two component, 100% solids, 0 VOC’s, exothemic, rapid curing, elastomeric, polyurethane, class 3 waterproof membrane lining system.

Rhino Hybrid HP1150: A two component, 100% solids, 0 VOC’s, exothermic, rapid curing, elastomeric, hybrid polyurea lining system.

RhinoGuard 2195: A two component, 100% solids, 0 VOC’s, exothemic, rapid curing, elastomeric, polyurethane lining system.

Find out more! Call us NOW on +61 7 5585 7000 or contact Rhino Linings here