Who are the leading epoxy suppliers and manufacturers in Australia?

Rhino Linings Australasia are leading epoxy suppliers and manufacturers, delivering high-performance industrial coatings and flooring solutions throughout Australia.

What are Rhino Linings epoxy coatings used for?

Rhino Linings epoxy coatings are used for flooring, waterproofing, primary and secondary containment, mining, defence, vehicle protection, and industrial asset preservation.

RhinoCoat MB (Moisture Barrier) Green Concrete Sealing System

RhinoCoat™ MB (Moisture Barrier)

RhinoCoat MB is an epoxy-based moisture barrier. It is a fast setting, clear, two component, 100% solids hybrid epoxy for on or below grade concrete slabs. It has been specifically designed for maximum moisture vapor protection and fast cure, whilst reducing the risk of outgassing and “fisheyes” typically associated with contaminated or porous concrete. RhinoCoat MB is a primer that is compatible for use under all ArmaFloor and RhinoCoat systems.

RhinoCoat MB Features & Benefits

Single Coat Application
Minimal downtime – 4-hour Tack-Free Cure
Zero VOCs – low odour
Green Concrete Primer (min. 7 days old)
Excellent Inter-Coat Adhesion

Built-In Adhesion Promoter
Low Temperature Curable (7.2°C)
Suitable under Resilient flooring systems
Moisture-tolerant, reducing moisture vapour levels from up to ≈122 g/m²/24 hours (≈0.122 kg/m²/24 h) to ≤≈14.6 g/m²/24 hours (≤≈0.0146 kg/m²/24 h)

RhinoCoat MB Typical Uses

RhinoCoat MB can be applied to concrete slabs with a relative humidity as high as 95% RH and provides protection from high pH levels and vapour drive for both seamless resinous and resilient flooring. RhinoCoat MB is specifically formulated to reduce moisture vapour transmission levels from up to ≈122 g/m²/24 hours (≈0.122 kg/m²/24 hours) to ≤≈14.6 g/m²/24 hours (≤≈0.0146 kg/m²/24 hours). RhinoCoat MB is an outstanding solution for long term moisture blocking, with great resistance to surface contaminants for both resinous and resilient flooring systems.

RhinoCoat MB Applications:

Resilient Flooring Primer | Resinous Flooring Primer | Horizontal Primer | Patching Filler | Adhesion Promoter
Moisture Mitigation System applied under all Rhino Flooring seamless flooring materials
Concrete slabs- on or below-grade without vapor barrier or retarder
“Green Concrete” slabs 7-days or older
Industrial, commercial, institutional, and residential application

Packaging

5 litre Jerry – Resin & 5 litre Jerry – Hardener = 10 litre kit
20 litre plastic pail – Resin & 20 litre plastic pail – Hardener = 40 litre kit

Coverage

1 litre of RhinoCoat MB will cover approximately 2.6–4 m² at 250-400 micro thickness. A nominal thickness of 0.400 micro is required for mitigating moisture vapour emissions greater than ≈78 g/m²/24 hours (≈0.078 kg/m²/24 hours) or 90% internal RH.